Solidcom H1 Wireless Intercom System Support

1. Connect the computer to the LAN port of the central station via a network cable.
2. Change the computer’s network port IP to one within the same subnet as the central station.
（1）Enter the computer settings.

（2）Find Network Settings



（3）Select Ethernet, right-click the mouse and choose “Properties”.

（4）Click the Internet协议版本4（TCP/IPV4）

（5）Select “Use the following IP address,” enter an IP address within the same subnet as the central station (the last digit must differ from the central station’s IP, ranging from 0 to 255; the central station’s current IP is: 192.168.218.10) and the subnet mask. The subnet mask must match that of the central station.

3. Open your computer browser and enter the IP address informations under LAN & SFP Port Settings in the wired network configuration (default: 192.168.218.10) to access the Web page (default password: 12345678).

1. Connect the LAN port of the charging Dock to the antenna or the LAN port of the central station using an Ethernet cable.
2. Look at the indicator light on the charging dock. When the connection is successful, the light changes from red to blue.
3. Place the beltpack into the charging dock and wait for pairing to complete automatically.

1. Enter the menu of Central Station or Antenna, find Network->Wi-Fi & BT, and turn on Wi-Fi & Bluetooth.
2. Tap the “+” icon in the upper-right corner to add a device.
3. Turn on Bluetooth on your phone and select Next.
4. Add the device you wish to connect from the list of available devices found.



HK